Guides· 11 min read

How to Turn a Loom Recording Into a Polished Product Video

What's baked into the footage, what the MP4 leaves behind on Loom, and a 5-step workflow to get from a 6-minute team walkthrough to a 90-second video you can put on your site.

By disha Sharma

ShareXLinkedIn
Cover for turning a Loom recording into a product video: a "Loom to product video" card showing video.mp4 plus captions.srt, then four steps: check what's baked in, rebuild what's left on Loom, cut to 90 seconds and polish

Most Looms are recorded for three teammates and a Slack thread. A few are good enough that someone asks, "Can we put this on the website?" Usually you can, but not by uploading the share link.

The short answer: to turn a Loom recording into a product video, download the MP4 (or fix your plan first, since the free Starter plan can't download), cut it down to the 60–90 seconds that show the product working, then add back what the download leaves behind: captions, a title card, zooms on the clicks that matter and one call to action. If the Loom shows your face, customer data or internal tabs, deal with that before you edit, because some of it can't be removed afterwards.

That last point is what most guides miss. A Loom is two layers, and they behave differently when you take the video out of Loom:

  1. Baked into the pixels at record time. Your camera bubble, anything on screen you didn't blur, and the size of the area you recorded. Loom's help pages describe turning the camera off and blurring content before or while recording. Blur "cannot be added after recording" (Loom).
  2. Layered on top in Loom's player. Closed captions, chapters and call-to-action buttons. Loom's download page says these "will not be included in the downloaded file" (Loom).

So the job has two halves. Check what's stuck in the footage, then rebuild what stayed behind on Loom. Here's the workflow, plus how to record your next Loom so it needs almost no salvage.

Check the recording before you download anything

Watch the Loom once, all the way through, with three questions in mind. The answers decide whether you salvage it or record again.

CheckWhy it mattersIf it fails
Is your camera bubble in the frame?Loom only documents turning the camera off while recording. Its help pages don't describe removing the bubble afterwards (Loom)Crop or zoom away from the corner it sits in, or keep it as a deliberate picture-in-picture
Is anything on screen private?Customer names, emails, internal URLs and Slack notifications are part of the footageCut those seconds, or re-record. Blur in Loom can't be applied after the fact
Did the workflow run cleanly?Errors and "let me try that again" are hard to cut aroundRe-record just that part, then join the takes in your editor

Also note the shape of the recording. Loom's download keeps "the original aspect ratio the video was recorded in", even though the web player shows 16:9 (Loom). A Loom recorded from an odd-sized window can look stretched or letterboxed once it leaves Loom.

Takeaway: spend five minutes watching before you spend an hour editing. A bubble or a leaked customer name decides the plan, not the edit.

Step 1: Get the MP4 (and the captions file)

On a paid plan, open the video in your Library, open the menu above it and choose Download. On the free Starter plan, Loom says no one can download, including the person who recorded it (Loom). Our guide on how to download a Loom video covers every plan and role, including the free route.

Grab the captions while you're there. Loom lets you download an SRT file of the captions from the same menu (Download captions). That's limited to creators and admins on Business or Business + AI, and to members and admins on Enterprise (Loom). Correct the transcript in Loom first: Loom says fixing the transcript fixes the captions too.

Two things to know about the file you get:

  • Trims carry over. Anything you trimmed in Loom stays trimmed in the MP4.
  • Filler-word removal may not. Loom's own pages disagree here. The filler-word page says the removal stays when you download (Loom). The download page lists it as not included (Loom). Listen to the first 30 seconds of your MP4 before you assume the "ums" are gone.

Takeaway: download the video and the SRT together. The captions file saves you re-transcribing later, and it doubles as a searchable script.

Step 2: Find the 60–90 seconds worth keeping

A 6-minute Loom made for a teammate usually has about a minute of footage a stranger needs. Don't scrub through the timeline to find it. Open the SRT in a text editor and search for the lines that mark a strong moment:

  • The before: "right now you'd have to…", "the old way"
  • The reveal: "watch this", "and that's it", "now if I click…"
  • The result: "so now you've got…", "and here's the output"

Each caption line has a timestamp, so every match points to the exact second. Write down the start and end of each candidate, then watch only those stretches. If you're not on a plan that can download the SRT, the transcript is still available on every Loom plan (Loom), so you can read it in the player and note the times by hand.

Then cut the internal parts, even when they look harmless:

  • Greetings and context only your team needs ("as we discussed on Tuesday…")
  • Names of teammates, customers and internal projects
  • Loading spinners and pauses. On a website, silence looks like a broken video
  • Every tangent. Internal viewers forgive thinking out loud. Prospects don't

For the order of the final cut, use a buyer-first structure: hook, problem, the 2–4 clicks, the result, then one next step. Our Zoom recording guide has a timing table for a 90-second cut. At the average conversational rate of about 150 words per minute (National Center for Voice and Speech), 90 seconds holds roughly 225 spoken words. Shorter is safer: Wistia found videos under a minute average a 52% engagement rate (Wistia).

Takeaway: search the captions, don't watch the whole Loom. Keep only the seconds where the product is doing something.

Step 3: Decide what to do with the audio

Loom audio is casual by design. You were talking to colleagues. You have three options:

  1. Keep your voice as it is. Works when you explained the workflow clearly and didn't name anything internal. It also sounds like a real person, which is part of what made the Loom good.
  2. Keep it, but cut around the problems. Remove the sentences that mention customers, colleagues or unreleased features. Bridge the gaps with on-screen text.
  3. Record new narration over the kept footage. Write about 150–225 words for a 60–90 second cut and record it in one quiet take. This is the right call when the original audio is full of internal references, or when a teammate's voice is in it and they haven't agreed to appear in marketing.

Takeaway: if more than a third of your sentences need cutting, re-recording the narration is faster than patching it.

Step 4: Add back what Loom kept

The MP4 leaves Loom's captions, chapters and buttons behind. For a public product video, rebuild these, in this order:

  • Captions. Many people watch with the sound off, and viewers who are deaf or hard of hearing rely on them. If you kept your original audio, your downloaded SRT is a head start. If you re-recorded the narration, you'll need new captions. Our guide to adding captions covers the options.
  • Zooms on the click that matters. Loom recordings are usually full-screen. Shrunk to a phone, the buttons are unreadable. Zooming in also hides the camera bubble if it sits in a corner.
  • A title card and end card with your branding, so it stops looking like an internal Loom.
  • One call to action, matched to the page where the video will sit.

You can do all of this by hand in any editor. Or you can hand the trimmed MP4 to a tool built for narrated recordings. Poko's MotionCut takes MP4, MOV, WebM and other common formats up to 200 MB. It transcribes the recording with word-level timing and adds punch-ins, picture-in-picture layouts and animated cutaways around what you're saying. It keeps your original voice and doesn't generate replacement narration. Its docs don't list captions, so plan to add those yourself.

Two practical notes for Loom files. Trim first: a long, high-resolution recording can pass 200 MB, and there's no point polishing footage you'll cut. And because MotionCut keeps the original audio, anything you said that shouldn't go public has to be cut before you start, not after.

Takeaway: finish the cut and the audio decision first. Polish last, and only on the 60–90 seconds you're keeping.

Step 5: Check it, then decide where it lives

Before the video leaves your folder, run four quick checks:

  • Mute test: watch it with the sound off. Does it still make sense?
  • Phone test: watch it on a phone. Can you read every button you click?
  • Data check: pause on every screen. No customer names, emails, internal URLs or Slack previews?
  • First-frame check: is the first frame your product, not your face or a browser tab?

Then pick where it goes on purpose:

NeedLoom share linkPolished MP4
Update for teammates who know the productBest fitOverkill
Help article or docs pageWorks, if the audience is customersBetter on a public page
Homepage, product page or pricing pageAvoid. Loom's player, not yoursYes
Follow-up email to a prospectFine for a personal walkthroughYes, for a shared demo
LinkedIn or other socialAvoidYes, as a 20–30 second cut with captions

See where to embed product videos for placement, and one demo, five clips for cutting short versions from the same footage.

Takeaway: the share link is for people who already trust you. The polished MP4 is for people you're still convincing.

How to record your next Loom so it's reusable

The cheapest salvage is the one you don't need. If a walkthrough might end up public, set it up before you hit record:

  • Turn the camera off, or decide where it sits. On the Mac desktop app, hover over the bubble and choose Turn camera off (Loom). If you want your face in the final video, a separate camera take gives you more options than a bubble stuck in a corner.
  • Record a window or a custom size, not your whole display. The Mac app offers Record display, Record window and Record custom size. A 16:9 window avoids stretched downloads and keeps your other tabs out.
  • Blur before you record. Blur works in Loom's Chrome extension, on Business, Business + AI and Enterprise plans, and not in the desktop app (Loom). Better still, record in a demo account with fake data.
  • Turn on Do Not Disturb and hide your bookmarks bar. One notification can ruin an otherwise perfect take.
  • Mind the Starter limit. Free Starter recordings stop at 5 minutes (Loom). That's enough for one workflow, and a good reason to record one workflow per Loom.

If the UI has changed since you recorded, or the Loom happened inside a customer's account, skip the salvage and record fresh. Our guides to screen recording on a Mac and making a tutorial video cover the setup.

Takeaway: record every walkthrough as if it might go public. It costs 30 seconds of setup and saves the whole salvage job.

Your next step

Pick the Loom your team keeps re-sharing, the one people already send to customers. Download the MP4 and the SRT, search the captions for the moment the product does its job, and cut 90 seconds around it. If your camera bubble or a customer's name is in the frame, record that one workflow again with the camera off, in a demo account.

Disha Sharma
About the author

Disha Sharma

Marketing, Poko Motion

Writes about AI video workflows, product storytelling, and motion video.

Questions, answered.

How do I turn a Loom recording into a product video?

Download the Loom as an MP4, along with the SRT captions file if your plan allows it. Search the captions for the moments where the product does its job, and cut those into a 60 to 90 second video. Remove internal names, private data and pauses. Then add captions, zooms on key clicks, a title card and one call to action, because the downloaded MP4 doesn't include Loom's captions, chapters or buttons.

Can I remove the camera bubble from a Loom after recording?

Loom's help pages only explain turning the camera off before or while recording. They don't describe removing the bubble afterwards, so assume it's part of the downloaded video. You can crop or zoom away from the corner it sits in, cover it with a title card, or keep it as a deliberate picture-in-picture. For your next recording, turn the camera off before you start.

Do Loom captions come with the downloaded MP4?

No. Loom's download page says closed captions, chapters and call-to-action buttons aren't included in the downloaded file. You can download the captions separately as an SRT file from the menu above the video, if you're a creator or admin on Business or Business + AI, or a member or admin on Enterprise. Correct the transcript in Loom first, since that also corrects the captions.

How long should a product video made from a Loom be?

Aim for 60 to 90 seconds for a homepage, product page or prospect email, and 20 to 30 seconds for social posts. At about 150 spoken words per minute, a 90-second cut holds roughly 225 words of narration. Wistia found videos under a minute average a 52% engagement rate, so open with the product's main result and cut every pause, greeting and tangent.

Can I blur sensitive information in a Loom after recording?

No. Loom's help center says information can't be blurred after recording, only before or while you record. Blur also works only in the Chrome extension, and only for creators and admins on Business, Business + AI or Enterprise plans. If a recording already shows customer data or internal URLs, cut those seconds in your editor or record that part again in a demo account.

Keep reading

#loom#product video#screen recording#video repurposing#demo video#captions#video editing

Poko Motion · the fastest AI motion video generator

Make your first video
in 5 minutes.

Paste a link, a doc or a deck. A swarm of AI agents builds the video while you watch.